Friday, March 27, 2009

New Welder!!!!!!

I finally purchased an entire welding setup. A new Hobart Handler 140 mig, cart, 40cf tank, and welding mask.

Just need to finish getting everything hooked up, and then give it a test run.

Grinding off the spring perch mounts on the Chevy 12 Bolt!

Been a while since I posted an update. Previously I have taken off the control arms and it has been determined that the front end is most likely a 1969 Camaro.

I've been working on cleaning up the Chevy 12bolt rearend I aquired about 3 years ago. The spring perches were about 2" off so they needed to be ground off.